top of page

A Step-by-Step Guide to Changing Your Bike Oil at Home (With Aimsol Lubricants)

Greetings, fellow riders! One of the most crucial aspects of bike maintenance is changing the engine oil regularly. Not only does it ensure smooth performance, but it also contributes to maximizing your vehicle's mileage. In this comprehensive guide, we will walk you through the process of changing your bike oil at home, highlighting the benefits of Aimsol Lubricants' high mileage, extra premium additives, and superior protection for 4-stroke engines. Trust the expertise of our oil masters at Aimsol Lubricants to keep your bike engine in top-notch condition.


STEP 1: The Importance of Regular Oil Changes

Before diving into the process, let's understand why frequent oil changes are essential for your bike's health. Engine oil plays a vital role in reducing wear, and friction, and maintaining engine cleanliness. By choosing high-quality engine oils like Aimsol Lubricants, with the expertise of our oil masters, you can significantly improve performance and extend your engine's life.

STEP 2: Preparing for the Oil Change

Gather the necessary tools, including a socket wrench, oil pan, funnel, and a new oil filter compatible with your bike model. Ensure your bike is parked on level ground and cooled down to avoid any accidents.

STEP 3: Draining the Old Oil

1. Locate the oil drain plug beneath your bike's engine and place the oil pan beneath it to catch the used oil.

2. Use the socket wrench to carefully loosen the drain plug. Be cautious as the oil might be hot.

3. Once loosened, remove the drain plug by hand and let the old oil drain completely into the oil pan.

STEP 4: Changing the Oil Filter

1. Find the oil filter on your bike and carefully remove it using an oil filter wrench.

2. Dispose of the old filter properly and clean the filter housing.

3. Apply a thin layer of fresh oil to the rubber gasket of the new oil filter.

4. Screw the new oil filter into place, ensuring it is snug but not overtightened.

STEP 5: Adding New Oil

1. Consult your bike's manual to determine the recommended oil type and quantity.

2. Place a funnel into the oil fill port and pour in the new Aimsol Lubricants' 4T oil, crafted with the expertise of our oil masters.

3. Be patient while adding oil and check the oil level using the dipstick to ensure it is within the recommended range.

STEP 6: Double-Checking and Clean-Up

1. Reinstall the drain plug securely and wipe off any spilled oil.

2. Start your bike and let it run for a minute to allow the new oil to circulate.

3. Turn off the engine and inspect for any leaks around the drain plug and oil filter.

4. Dispose of the used oil properly at a recycling facility.


Congratulations! You have successfully changed your bike oil at home, saving time and money while ensuring optimal engine performance. Trust the expertise of our oil masters at Aimsol Lubricants, who craft our high-mileage, extra premium additives, and superior protection 4T oil, to keep your bike's engine running like a charm. Regular oil changes with Aimsol Lubricants' 4T oil will undoubtedly enhance your bike's performance, fuel efficiency, and overall longevity. Embrace the knowledge and expertise of our oil masters, and you'll be all set for countless thrilling journeys ahead! Happy riding!

1 view0 comments
bottom of page